Pinouts for Virtua Fighter 3 - Sega Model 3 step 1.0 PCB set.


   POWER CONNECTORS
   ----------------

   JST CN13
   1-8 - +3.3 volts
   9-18 - Ground
   19-24 - +5 volts

   JST CN14
   1-5 - +5 volts
   6-10 - Ground

   JST CN15 (Used for cage fans only)
   1 - +12v
   2 - NC
   3 - Ground


   VIDEO
   -----

   JST CN6 (Can also use 15 pin VGA connector CNVGA1 but output at
   24KHz/H;60Hz/V)
   1 - Red
   2 - Green
   3 - Blue
   4 - Composite Sync
   5 - Ground
   6 - NC


   AUDIO
   -----

   JST CN8
   1 - Left Ground
   2 - Left Signal
   3 - Right Ground
   4 - Right Signal


   CONTROL INPUTS
   --------------

   JST CN2
   1 - Coin 1
   2 - Coin 2
   3 - Test
   4 - Service
   5 - NC
   6 - NC
   7 - Start P1
   8 - Start P2
   9 - Up P1
   10 - Down P1
   11 - Left P1
   12 - Right P1
   13 - Button 1 P1
   14 - Button 2 P1
   15 - Button 3 P1
   16 - Button 4 P1
   17 - Up P2
   18 - Down P2
   19 - Left P2
   20 - Right P2
   21 - Button 1 P2
   22 - Button 2 P2
   23 - Button 3 P2
   24 - Button 4 P2
   25 - NC
   *Please confirm the UDLR pins with the test menu, as these are from
   memory!


   CONTROL OUTPUTS
   ---------------

   JST CN3
   1 - Coin Meter 1
   2 - Coin Meter 2
   3-8 - NC

   Remember you need a 3.3v PSU as well as 5v, so use a computer ATX
   supply, it's ideal!